Pump Smarter, Foil Longer. Pumpfoilytics (formerly PumpfoilMate) is the first Garmin Connect IQ app built specifically for pumpfoiling. The Fusion detection algorithm automatically picks up successful and failed starts, pumps, flights, pauses and glides — no need to fiddle with the watch during your session. Just go pump, and let the watch track every stat that matters. And so you can read the one metric you actually care about between two pumps (e.g. heart rate), pick your pump screen in Settings — an XL screen shows a single value full-size, readable even mid-pump. Then press "Just pump it!" in the main menu and go. The basics • Auto-detection — The app picks up when you start a run and when you stall, so you ride without fiddling with the watch. One tuned detection, nothing to choose; manual override on the LAP button. A GPS outlier filter keeps phantom runs out. • Fail tracking — A short attempt (under 8 s or 25 m) is logged as a Fail instead of a successful run, and your session hit rate shows up as a percent. • Pump Laps only — Only your pump runs become laps. In between, the recording keeps going, so your heart rate counts as recovery. On the watch • 6 Pump screens — Five XL screens give the whole glass to one number: distance (the default), heart rate, pumps, time and speed. Plus Multi Iten: heart rate, distance, time and speed at a glance. A live HR-zone arc runs along the top edge: green up to zone 3, yellow for zone 4, red for zone 5. Or build your own with Custom Screen: 4 slots, 12 values to choose from. • Recovery pages — One card for every pump run, plus four session overviews: totals, pumps, averages and time. • 3-page Session Summary — Right after you save, scroll with UP/DOWN through Overview, your hit rate, and your peak numbers. • Milestones — Ten milestones from 100 m up to 97.2 km (Pump Iten), celebrated on every pump lap, not just on session totals. • Clear cues — One clear tone per event, and a vibration pattern strong enough to feel through a wetsuit. After the session • Garmin Connect charts — Pump / Glide / Recovery timeline, colour-coded second by second, plus all the numbers: run time, distance, hit rate, longest run, top speed (the steadier 5-second value), metres per pump, longest glide. • Web companion — Scan the QR code in the summary right after you save and sign up at pumpfoilytics.com. Your rides, phases and stats in the browser, free. • Foilsetup — Name up to three gear setups in Garmin Connect and every session carries the one you rode. • HR and speed alerts — Buzz and tone when you cross your limit. 130–200 bpm in 5 bpm steps, 9–20 km/h. • User Guide — updated: 9 short pages in Settings explain the app. Compatible with fenix 7, 7X, 7 Pro, 8, epix, epix Pro, Forerunner 255, 265, 570, 965, Instinct 3, Venu 3, Vivoactive 5, Enduro 3, and other Connect IQ 5+ watches (67 devices total). On Instinct the app runs a slimmed build made for the smaller screen. 11 languages: English, German, French, Italian, Spanish, Portuguese, Dutch, Swedish, Japanese, Danish, Polish. Companion watch face: Pumpfoil – https://apps.garmin.com/apps/645e324a-b3ae-41f1-a93a-46abd2eb8d56 Formerly known as PumpfoilMate.

2.18 New main menu, your own pump screen, and milestones the way you like them. Best of: • New main menu: press "Just pump it!" and off you go. Right below it you see your current foil setup. • Custom Screen: build your own pump screen, 4 slots and 12 values to choose from. • Lap Alert with pace: below the distance you now see your pace per km. • Milestones your way: Every session, Only new ones or Only at the end. Also new: • The main menu appears right at launch and on the menu button: "Just pump it!", "Foilsetup", "Settings" and "User Guide". "Just pump it!" takes you to the start screen, and START begins recording. It replaces the setup wizard. • Settings reordered: Pump Screen, Detection Mode, Lap Alert, HR Alert, Speed Alert and Audio Cues, then Advanced with Voice Laps, Stall Alert, Milestones and Foil Time. Below the highlighted item you see its current value with a short explanation. • Custom Screen: 4 slots (top, middle left, middle right, bottom), each showing one of 12 values: run time, run distance, pumps, heart rate, speed, top speed (best 5 s average of the session), pump rate (pumps/min), metres per pump, and average speed of the run, the session, the last 60 s or the last 15 s. Defaults are run time, average run speed, 60 s average and metres per pump. Pick it in the watch's Pump Screen menu (below Multi Iten) or in the Connect IQ app on your phone. • Lap Alert with pace in min:ss per km: from 1 km the pace of the last kilometre, before that the run average. Distance and pace have more room. • Voice Laps shows the big lap display with distance and pace at every lap, even on watches without a speaker. Before, those only beeped. • Milestones: "Every session" as before, "Only new ones" or "Only at the end". With "Only new ones", a milestone you have already seen no longer covers your lap. The watch remembers them from this update on. With "Only at the end" you see them in the summary. They are always counted. • Badges: the big number is fully visible, the name sits on top as a coloured rim. In the summary they come in ascending order, the highest last. • Foil Time is out of beta and sits under Advanced. • Fix: in Manual and for laps switched with LAP, Lap Alert and milestones start from zero in every lap. Instinct keeps its menu and shows milestones in its own way. The main menu, Custom Screen, Voice Laps, Foil Time and the coloured badges are not available there. Lap Alert with pace and the fix apply on Instinct too. Your settings stay as they are. Earlier versions: • Ten milestones from Pumper (100 m) to Pump Iten (97.2 km), with badges. • Foil Time: the Garmin timer only runs while you foil. • Metres per pump in Garmin Connect and on the watch. • LAP twice ends any lap, a prompt when you stop moving, Voice Laps with 1 mi too. • No accidental stops, foil setup picker, pump screen Multi Iten and much better pump detection. • Chest strap check, XL screens with watermarks, clear tones and Lap Alert. After every pumpfoil session, open Garmin Connect for pump distance, hit rate, metres per pump and recovery context. Pumpfoilytics is the first Garmin app built specifically for pump foiling, whether you dock start, prone, or pump between wing runs. Works on fenix 7 / 7S / 7X / 7 Pro / 8 / 8S / 8X, Forerunner 255 / 265 / 265S / 570 / 955 / 965, epix Pro, Instinct 3, Venu 3, Vivoactive 5, Enduro 3, MARQ and other Connect IQ 5+ watches.