StemView sends your ride data to a StemView handlebar display over Bluetooth, so you can read it big, in full sun. StemView is a display you build yourself: a Waveshare board with a reflective 4.2" screen, the StemView app. The app and the build guide are coming soon; until then this field has no display to connect to. HOW TO USE 1. Activate your StemView display with the StemView app (one time). A new display starts locked: until it is activated, this field shows ACTIVATE. 2. Add the StemView field to any bike activity data screen. 3. Once activated, the display shows a 4-digit code on its PAIR WATCH screen (long-press KEY if you don't see it). This code belongs to the watch link; it is not the 6-digit code the app asks for. 4. Enter that 4-digit code in the field settings in the Connect IQ app. 5. Start your ride. The field shows OK, the display battery and the link rate. COMPATIBILITY Tested on a fēnix 8 (43 mm). The other listed models have so far been tested only in Garmin's simulator. Your activity is still recorded by your watch: if the display is off or out of range, nothing is lost. StemView is an independent project and is not affiliated with or endorsed by Garmin.

1.0.2: your StemView screen now shows which Garmin watch it's paired with, and uses your FTP from Garmin Connect for %FTP and power zones on supported watches. 1.0.1: a "StemView" label above the status so you can tell it apart from other Bluetooth fields, and the diagnostic line no longer gets cut off on round screens.