HC Route Power Pacer Online is a GPS route-tracking data field that brings paper elevation profiles and split-time targets from your bike stem onto your Edge. It matches GPS position against the route geometry to show the elevation profile, remaining distance, current/upcoming gradient, target power, messages, and ETA. Add split targets, aid-station reminders, notes, target-power sections, popups, sounds, and high/low power alerts anywhere on the route. Create routes with the free HCRPP Online Generator. Import a GPX or GPS activity FIT, trim or reverse the route, and configure messages, notifications, ETA, and Profile Power Overlay per course. ZWO workouts are supported. Select the start point and intensity, and the Generator converts the time-based workout into distance-based target-power sections using gradient and the ETA Power Model. Save favorite routes and workouts for outdoor training. Sending a package issues a four-digit Receive Number. In Connect IQ settings, select Download Slot, enter the number, then choose the course with Course Select. Each course can be up to 500 km. Four Edge slots hold up to four courses (2,000 km total at maximum length). The browser can save 10 courses and 10 ZWO workouts; courses can also be exported as JSON. Sequential GPS matching limits incorrect jumps on out-and-back, loop, or intersecting routes. After a deviation, the app searches again and recalculates progress from the rejoin point. Garmin Connect / Connect IQ settings show Slot 1–4 route names, Receive Status, and Last Transfer Result as read-only information after the Edge app runs and Garmin Connect synchronizes. Generator: https://hcrpp-online-api.t-toab1974.workers.dev/generator/ Manual: https://toab.lovestoblog.com/manual/HC_Route_Power_Pacer_Online_JP.html HP：TOAB Cycling　CONNECT IQ APPS https://toab.lovestoblog.com/index.html KEY FEATURES • GPX and GPS activity-FIT course import • ZWO outdoor-workout conversion • Route trimming and reversal • 500 km courses and four Edge slots • Distance-based target power, messages, popups, and sounds • High/low power alerts with HR/cadence conditions • Gradient profile plus FTP-colored or blue Profile Power Overlay • GPS tracking and route recovery • Average-pace or gradient/target-power ETA • 5/10/15/20/30 km and full-profile FULL/ZOOM views • Browser storage for 10 courses and 10 workouts BASIC USE 1. Import a GPX or activity FIT in the Generator. 2. Configure the route and events. Optionally import a ZWO and adjust its start point and intensity. 3. Select “Send to Edge,” then enter Download Slot and Receive Number in Connect IQ settings. 4. After download, use Course Select, add this data field to an activity profile, and ride. TRIAL AND PURCHASE All features can be tried for seven days from the first KiezelPay license check: https://kiezelpay.com/ Continued use requires a US$5 license. If the purchase code does not appear, check Garmin Connect Mobile and restart the Edge. If hard to see, temporarily use a single-field layout. Course reception and license checks require Edge communications. DATA HANDLING The original GPX/FIT is processed in your browser. Data is sent online only when “Send to Edge” is selected. The package contains the selected route, elevation, target power, messages, and settings. It is deleted after the server accepts the Edge completion receipt. If not received or confirmed, it is deleted within 30 days of upload. Browser-saved courses and workouts remain only in that browser and device. Clearing browser data removes them; export important courses as JSON. IMPORTANT • Add this data field to an activity-profile data screen. • Power features require a power meter. • HR/cadence conditions require compatible sensors or data. • Displayed values are riding aids, not guarantees. • This app does not replace Garmin navigation or turn-by-turn directions. • Always prioritize road conditions, laws, official instructions, and safety.

UPDATE HISTORY v3.3bt Regular / 2026-10-04 Changes since v3.3az: - Added a combined route overview and elevation profile: route above profile in one field, or on the right in supported splits. - Auto now defaults to the combined view in one field and Graph in split fields. Enable Multi Field Route + Profile for supported splits; small or narrow fields stay compact. - Renamed Display Layout to 1 Field Display Layout. Saved Graph/text choices are retained. Also available in the Edge DISPLAY menu. - Added selectable left/right bottom fields in one-field layouts: Electronic Gear, Cadence, Heart Rate, Speed, Course Distance, TIME, Clock, ETA, Grade, Power, Power (3 s), Power (30 s), Average Power and Target Step Avg Power. Defaults: ETA/TIME. - Clock uses 24-hour time. Bottom-field Grade estimates riding gradient from measured elevation/distance. Missing values show "--". - Off-route display now zooms automatically, showing actual GPS position and the last matched route position with north up. Normal view resumes after confirmed recovery. - Added a red off-route trail, sampled about every 20 m and limited to 32 points. Older points are replaced; confirmed recovery clears the trail. GPS gaps and large jumps are not joined. This is a visual aid, not navigation. - Added tap-to-zoom from Full range. Combined views now respect Top Field Font, Mini Field Font, marker blinking and Mini Field View Off. Adjusted cell heights, spacing and labels. - Changed "Free" target-power labels and notifications to "0 W". - Reduced transfer/display memory use to preserve graphics and values during memory pressure and recovery notices. Critically low memory uses a simplified display. Requires Connect IQ 5.1 or later. Update Edge firmware if needed. --- v3.3az Regular / 2026-09-18 - Added Edge settings for Slot 1-4 Route, Course Select, Download Slot, Receive Number and DISPLAY, including Profile Map Range km and Mini Field View. - Receive Number now shows all four digits, with an active-digit frame and arrow, touch and button controls. - Moved Receive Status and Last Transfer Result out of the Edge menu; main-screen display and mobile feedback remain. Fixed stale feedback and retained transfer results across restarts. - Reset the tapped profile view when selecting an unavailable slot. --- v3.3ap Regular / 2026-08-31 - Reordered course settings and shortened route/status labels. - Reduced top DIST/PWR side padding to 2px. - Added Target Step Avg Power: measured average power per target step, reset at every boundary, including equal-target and 0 W steps. - Renamed Value Font to Top Field Font; options and saved values are unchanged. --- v3.3am Regular / 2026-08-29 - Added FULL/ZOOM feedback and read-only route names, receive status and transfer results in mobile settings. - Reports transfer progress, errors and EMPTY/INVALID/READ ERROR slot states. --- v3.3aj - Added per-route profile shading with FTP-zone colors or single blue. Routes without this setting default to Off; 0 W steps are not shaded. - To enable shading on an existing route, select Enabled in the Generator and transfer it again. --- v3.3af - Initial Public Release - Separate Online app with four-digit transfers, four Edge course slots and courses up to 500 km. - GPS-to-route matching, off-route recovery and improved loop/intersection handling. - Redesigned Generator for GPX and GPS-enabled FIT files, with section selection, reversal and map/profile editing of power steps and messages. - Browser storage for 10 courses, plus JSON backup and restoration. - Per-route messages, power alerts and ETA settings; Elapsed Avg and Power Model ETA. - 5/10/15/20/30 km and full-course profiles, tap switching and configurable Mini Fields. - Updated sounds and a seven-day trial. - Supports Edge 540/550/840/850/1040/1050. The V2 Draft display is not available in Online.