A precision sports instrument in deep blue: a large digital time in the middle of a machined dial, with a three-day forecast above it, four readings set in the ring and the day's distance below. The time runs across the centre in bright white digits with a silver lower edge, so wide that its ends slip under the ring. The weekday and date sit just beneath it. Hours always show two digits, and the clock follows your watch's own 12/24-hour setting. Above the time, three columns give today, tomorrow and the day after, each with the day's name, a weather icon - clear, partly cloudy, cloudy, rain, snow, storm or fog - and the high and low temperature. Today's name is picked out in the accent colour. Four readings sit in the ring between the hour markers, each a large value along the ring with its label curving inside it. At ten and two are steps and heart rate, or calories or altitude if you prefer. Either side of six are the battery and Body Battery. Under a printed route at the bottom, the distance you have covered today, in kilometres or miles to match your watch. The ring is built like a dive instrument: applied silver markers with a triangle at twelve, a minute track with two painted copper sections, a 24-hour scale and a fine outer scale. Behind the time, the ground is lit from the middle with soft rays. A thin line in the accent colour sweeps the minute track to count the seconds. Five themes share the same dial: Blue, Carbon (black with orange), Forest (deep green with lime), Burgundy (with gold) and Titanium (grey with red). Always-on is a separate dark frame: the hour markers and minute marks dimmed, with the time and date over them. It stays within the display brightness limit, so it remains lit instead of blanking after a few seconds. SETTINGS Theme: Blue, Carbon, Forest, Burgundy or Titanium. Left reading: steps, calories, heart rate or altitude. Right reading: heart rate, calories, steps or altitude. Show seconds: on or off. Shows or hides the moving seconds mark. Time format, temperature units and distance units follow the watch's own settings.

Release 1.0.0 - Initial version