Count your pump foil runs, measure every one of them and see your progress, without noting anything down. Start the app, wait for GPS, go. The watch does the rest. THE RIGHT START, THE RIGHT END A run counter is only worth something if it cuts at the right moment. That is where most of the work went, every setting measured on hundreds of real runs rather than guessed. - The start is read from your effort on the dock, before you even pick up speed. - The end is read the moment the flight stops, even when your wrist goes under and GPS drops out. - A run cut by a GPS gap mid-flight stays in one piece. - A run is missed if its distance or its time is under a threshold (10 m, 5 s for now). A start that takes off then drops too quickly also counts as missed; climbing back onto the dock or an acceleration without flight does not count. GPS GLITCHES REMOVED When you fall and your wrist goes under, GPS goes haywire: it "speeds up" to 30 km/h, shoots straight for the dock or runs back along your track. For sessions uploaded to the website, read from GPS alone, these drifts are spotted and removed. On the watch, the app limits what GPS can do (speed jumps, signal gaps, a track that is too straight) but cannot fix everything: a wrong point remains possible, and the file keeps the raw track for analysis. EVERYTHING THAT MATTERS, RUN BY RUN Distance, time, average and top speed, pumps, metres per pump, glide, heart rate and zone. Your runs sorted into distance and time classes for your level, from beginner to expert. Session totals, averages and records. At the foot of the classes: "N made / M missed · P %". Totals: made out of attempts, time as h:mm:ss. METRONOME Setting on by default: during a run, a vibration and a beep at 30 s (the beep on watches that have a speaker), then the same cadence. YOUR DASHBOARD, TO UNDERSTAND YOUR PROGRESS On the PumpFoil Runs website, in beta and open to sign-up by e-mail, upload your sessions and see what changes: - your progress: distance and duration records, cadence, metres per pump, runs per start, heart rate, over 7 days, 30 days or since day one; - every session on the map and the speed curve, run by run, with all its figures; - its profile: the time, heart rate and distance of each run through the session, from start to finish, to see when you are at your best and when fatigue sets in; - its place in your history: its rank, the gap to your average, your records; - your older sessions too, even those recorded without the app: their runs are found from GPS alone, 96% of the app's runs on the test bench; - a doubtful value of a run (speeds, metres per pump, heart rate, pumps), even one added by hand, can be set aside: the run stays, the value leaves the statistics and records; - an outing the watch split into two files reads as one. pumpfoil-runs.pumpfoil-runs-worker.workers.dev BUILT FOR THE WATER Very large figures, readable in sunlight. Nothing to set: your level is enough. Garmin Connect gets one lap per run, and the file keeps everything for analysis. BUTTONS SELECT stops the session, or opens the chosen run on the run list. BACK closes the run in progress. MENU (long press) opens the settings. UP and DOWN change screen. On the Venu Sq 2: swipe to change screen, tap the screen to stop. Devices: fenix 8, 8 Pro and 8 Solar, fenix 9, 9 Pro and 9 Pro Solar, fenix E, fenix 7, 7S and 7X with their Pro and Solar editions, epix (Gen 2), epix Pro (Gen 2), Forerunner 165, 255, 265, 570, 955, 965 and 970 (Music and S editions included), MARQ (Gen 2) and MARQ Aviator (Gen 2), D2 Mach 1, D2 Mach 2 and D2 Mach 2 Pro, Descent Mk3 and Mk3i, Enduro 3 and 4, Instinct 3 AMOLED and Venu Sq 2 (Music included) — so also the quatix 7, tactix 7, Enduro 2 and D2 Mach 1 Pro, which share those profiles. English and French.

VERSION 01.03.26 DEVICES The Garmin Enduro 4 is now supported. MADE / MISSED A run is missed if its distance or its duration is under a threshold (10 m, 5 s for now). At the foot of the class screens: "N made / M missed · P %". The Totals screen shows made runs over attempts, and the duration as h:mm:ss. METRONOME Setting on by default: during a run, a vibration and a beep at 30 s (beep on watches that have a speaker), then the same cadence. GPS The app asks the watch for the multi-band or multi-constellation GPS mode when it reports it as supported (SAT_IQ is no longer requested: it left an incomplete recording in a session), and records in the file the requested mode, the obtained mode and the delay of the first fix. Accuracy has not been measured. NAVIGATION As soon as a run starts, the watch goes back to the Live screen. After one minute without a button press it goes back too (setting "Back to Live after 1 min", under Screens, on by default; Run screen 2 is excluded). FIXES A false start (track too straight or top speed too low) is no longer counted as a missed start. Rates and made runs cover the whole session, even beyond 200 runs.