This data field connects Garmin watches via Bluetooth to the KingSmith WalkingPad, and branded devices, to show treadmill speed, distance or step data in real-time during your workout. Together with the Mode and other summary data and graphs, this is written to the FIT file, so they can be viewed in Garmin Connect once the activity is uploaded. In the data field settings within the Connect IQ app, the automatic start and stop of the treadmill at activity starts and stops, as well as the displayed data field title and value (speed, pace, distance, steps, etc.), can be configured as described here: https://support.garmin.com/?faq=SPo0TFvhQO04O36Y5TYRh5 Furthermore, it is possible to control the treadmill remotely via the smartwatch and change various settings (start speed, maximum speed, sensitivity in automatic mode, child lock etc.). A tutorial using the fēnix® 7 can be found here: https://www.youtube.com/watch?v=8CH_EeTabSQ ╭─────── ≡ OFFICIALLY SUPPORTED BY KINGSMITH ╰─── This data field is developed with the kind support of KingSmith, the manufacturer of WalkingPad treadmills - building on first-hand technical knowledge instead of guesswork. ╭─────── ≡ IMPORTANT ╰─── ￭ The recording does not affect Garmin's own step and distance fields. Unfortunately, it's not possible for Connect IQ data fields to write to the native step and distance information. This means your steps recorded by the data field are not added to your daily steps. This is a Garmin restriction that I cannot do anything about. But maybe you can - by contacting Garmin. The more that do so, the greater the chance that this behaviour will be changed: https://www.garmin.com/forms/ideas/ ￭ Before writting a review, please contact me if you have any issues! This is a personal hobby project. KingSmith actively supports the development, but I am not employed by or commercially affiliated with KingSmith, Xiaomi, Garmin or any other company mentioned here. If the data field does not work with your device, please contact me with an email address for inquiry rather than writing a negative review. Do not hesitate to contact me if you have any suggestions for new features or improvements, or if you want to let me know which treadmills are compatible. ╭─────── ≡ COMPATIBLE TREADMILLS ╰─── - WalkingPad A1 Pro - WalkingPad C1 - WalkingPad C2 - WalkingPad P1 - WalkingPad R1 Pro - WalkingPad R2 / TRR2F (10 km/h (6.2 mi/h) limit, not every hardware revision) - WalkingPad Z3 - Dynamax RunningPad - Flow Fitness DTM100i - Gymstick WalkingPad Pro - Xiaomi WPA1F Pro Other KingSmith models (Z1, MX*, K20S, R3*, X218, G2*, G15, K12, K15, MC11, MC21, R1H, S1, M1H, etc.) likely work too but are unverified - please contact me with feedback. ╭─────── ≡ INCOMPATIBLE TREADMILLS ╰─── - WalkingPad A1 - WalkingPad R2 / R2 Pro / TRR2FB (with 12 km/h (7.5 mi/h) speed limit) - WalkingPad WPPRO - WalkingPad G1 / G1 Pro - WalkingPad K12 Pro - WalkingPad X21 - WalkingPad X23 / MX16 If your model is not listed, please contact me. ╭─────── ≡ KNOWN ISSUES ╰─── ￭ The connection cannot be established. Make sure the WalkingPad is switched on, hold the watch close to it, and no other device is connected - in particular, close the KingSmith / KS Fit app on your phone, as a treadmill only allows one Bluetooth connection at a time. ￭ Garmin Connect always displays kilometres and km/h, no matter what is set in the settings. Garmin does not allow the unit to be dynamically set based on the settings in the FIT file. Unfortunately, there is also no conversion in Garmin Connect, so there is no easy solution for this problem. However, it is possible to write to https://www.garmin.com/forms/ideas/ about this issue, and the more people write, the greater the chances that Garmin will address it.

VERSION 2․60․0 - Added support for fēnix® 9 43mm / 47mm / 51mm, fēnix® 9 Pro 43mm / 47mm / 51mm and fēnix® 9 Pro Solar 47mm / 51mm - Updated to Connect IQ SDK v9․2․0 VERSION 2․50․0 - New "Device identifier" data field option: shows the Bluetooth identifier of the connected treadmill, so you can tell which one is connected when several are in range - The Device Info menu now shows the model, firmware version and total mileage reported by the treadmill, if the treadmill provides this information VERSION 2․40․0 - When several WalkingPads are in range, the nearest one (strongest signal) is now chosen automatically VERSION 2․30․0 - Added support for WalkingPad Z3 (and likely other KingSmith FTMS models) - Added support for D2™ Mach 2 Pro, Forerunner® 170 and Forerunner® 170 Music - New defaults on first install: the treadmill now starts (manual mode) and stops with the activity - configurable in the data field settings - Updated to Connect IQ SDK v9․1․0 VERSION 2․20․0 - Updated to Connect IQ SDK v8․4․0 VERSION 2․19․0 - Added support for D2™ Mach 2, D2™ Air X15, Instinct® Crossover AMOLED and Venu® 4 VERSION 2․18․0 - Added support for fēnix® 8 Pro 47mm / 51mm / MicroLED, Forerunner® 570 42mm / 47mm, Forerunner® 970 and Venu® X1 - Updated to Connect IQ SDK v8․2․3 Due to Garmin's limitation on release note length, here is a summary of the most important past updates: Support for many new devices (e.g. Descent™ G2, Approach® S50, Instinct® 3 / E, fēnix® 8 / E, Enduro™ 3), expanded support for additional WalkingPad models (e.g. WalkingPad R1 Pro, R2, Flow Fitness DTM100i), improvements to the settings view, new features for treadmill control and display, as well as various bug fixes and optimizations.