== Overview == This datafield provides a graph showing the percentage of time spent in the defined power zones. The bars are growing depending on the time you spend in the zone during the activity. It is designed for use in every screen-layout and field size, keeping the default textsize and style, but showing more information about heart rate in a single field. User configuration is supported for definition of user depending power zones and options. It's not possible to read the zones definition from the user profile. For using this field you need a power sensor connected to your watch/device. == How to use == The datafield is used inside an activity (not as watchface or widget). You have to insert it on a data page of your activity. Go to device settings, choose the activity, select a data page, select a field for changing, select the field type (ConnectIQ for datafields from app store), select this datafield. Then it's assigned to a data page and you will see it after starting the activity. == User-Configuration == The datafield uses the possibility of defining user settings using Garmin Connect Mobile or Garmin Express. For details on how to change settings please check this thread: https://apps.garmin.com/settingsHelp The following options are supported: - Use power zones defined in app settings. Please change these values to use your own zones. - Show power value as percent - Show zone number with decimal value as text behind the zone value - Show value colored in zone color - Show range below the zone 1. This shows a gray bar on the left side of the zones which counts the time spend below zone 1 - Select a chart design (several variations from transparent to solid) - Select dynamic textsize depending on field size == Questions? == Please use the „contact developer“ form on the right.

If you get problems after update (iq-Logo instead of datafield), please uninstall ans install the datafield again. That fixes most problems of changd app settings. version 1.4.0 - read power zones from user profile (alpha, untested) - read FLP from user profile - both options can be set in app settings - if values are nopt available, values from app settings are used instead version 1.3.13 - new devices (Fenix 9) version 1.3.12 - new devices (Edge 550/850/MTB, fenix 8 Pro, Forerunner 570) version 1.3.11 - new devices (FR970) version 1.3.10 - new devices (Fenix 8) version 1.3.9 - new devices (FR255 series, Edge1050) version 1.3.8 - new devices (Fenix 7SPro/7XPro) version 1.3.7 - fixed (hopefully) high CPU usage by reducing NP calculation to 30sec interval version 1.3.5 + 1.3.6 - added NP (normalized power) as available numeric value version 1.3.4 - new devides (Epix Pro, Fenix 7 Pro) version 1.3.3 - new devices (Edge 540/840) version 1.3.2 - corrected some app settings descriptions version 1.3.1 - added zones source selection (PWR Watt / LTPw percent) - changed settings menu, zone settings are available in submenus now version 1.3.0 - added app settings to define LTPw values (zone settings in % and LTPw value in Watt). When the LTPw checkbox is set, the zones (PWR) are updated with LTPw settings. This way you only need to adjust the LTPw field to update all zones. version 1.2.4 - new devices (FR265, FR255, MARQ series...) version 1.2.3 - new devices (Edge 1040, FR255 ...) version 1.2.2 - new devices (fenix 7, epix 2) version 1.2.1 - New option for minimal PWR value. If you have deactivated the option "count only inside zones", you can set a min. PWR value for counting values below zone 1. All values between this min. value and zone 1 will be added to zone 1. So you can prevent counting time your are not cycling. version 1.2 - New option for background color. You can select background color from activity settings (default) or you can select white or black. Select the fixed color if your device doesn't report the activity background to datafields (like Vivoactive 4s). version 1.1.1 - bugfix of iQ-Error on startup of activity. version 1.1.0 - added a second gray triangle pointer behind the white one which is showing the average power - added possibility to show average power text behind the current power. This option can be activated in app settings. - added field caption "PWR" to distinguish from HR chart field. version 1.0.10 - added new devices (fenix 6) version 1.0.9 - excluded devices which don't support power sensors version 1.0.8 - instead of possibility to show zone0, you can now choose to add values outside the zones to the lowest or highest zone. values greater zone 5 are added to zone 5 values smaller than zone 1 are added to zone 1 - option for monochrome displays (like Edge130) for a black/white chart version 1.0.7 - added app option to define range of seconds for calculation of mean power. You can choose between 1 to 10 seconds. The displayed power value is calculated using a mean value over the last x seconds. version 1.0.6 - added zone number and zone decimal value. Activate it using the app options version 1.0.5 - added new devices version 1.0.3/1.0.4 - reset datafield on actitivy store/discard. Prevents datafield keeping old data on new activity. version 1.0.2 - support for new SDK and new devices version 1.0.1 - support of new devices (e.g. Edge 1030) version 1.0.0 - support of new devices - optimized recognition of paused activity version 0.1.1 - init datafield on start of new activity version 0.1.2 - changed datafield-name (german) - changed colors to gray-blue-green-yellow-orange-red-purple(or pink on some devices) version 0.1.3 - corrected checking of sensor-values. crash while using this field without power sensor should be corrected now version 0.1.4 - calculating 3-sec-average power value (preventing jumping marker in the chart)